Macurco CM-6 Specifikace

1 Macurco™ CM-E1 Carbon Monoxide Detector User Instructions Important: These User Instructions are to be provided to the ho

10Seven years after the CM-E1 is installed the end-of-life signal will be activated indicating that the CM-E1 has reached the end of its service life

11LIMITED WARRANTY The Macurco CM-E1 Carbon Monoxide Detector is warranted to be free from defective material and workmanship for a period of two (2)

2TABLE OF CONTENTS GENERAL SAFETY INFORMATION 3 Intended Use 3 List of Warnings and Cautions 3 USE INSTRUCTIONS AND LIMITATION

3 GENERAL SAFETY INFORMATION Intended Use The CM-E1 is a low voltage (9-32 VDC) detector of Carbon Monoxide (CO). The CM–E1 is designed for connectio

4Transient CO situations can occur: 1. Excessive spillage or reverse venting of fuel burning appliances caused by outdoor ambient conditions, such a

5CM-E1 may not function effectively below 40F (4.4°C) or above 100F (37.8°C). Using the detector outside of this temperature range may adversely a

6For best operation, mount a CM-E1 in the hallway near each bedroom or office area. In addition, another CM-E1 may be mounted just inside the door fr

7 The relay of the CM-E1 is a dry contact and rated at 100mA, 40VDC. It is not suitable for fan control use. When connecting the units to remote b

8The CM-E1 continuously monitors the ambient air at the sensor. If the CM-E1 measures levels of CO greater than the danger level, the RED light will

9Transient CO situations can occur: 1. Excessive spillage or reverse venting of fuel burning appliances caused by outdoor ambient conditions, such a